You’ve been there. You’re two miles into the backcountry, the temperature has dropped 30 degrees overnight, and your bow sight looks like it went through a car wash. The anodizing is scratched to hell, the finish is flaking, and you’re wondering why you trusted a piece of gear that couldn’t take a hit.
That ends here.
Why Finish Matters More Than You Think
Let’s get something straight: a bow sight’s finish isn’t vanity. It’s armor.
Every inch of your setup takes punishment in the field. Tree limbs, rock faces, truck beds, pack straps, early-morning frost, and late-season mud — your gear doesn’t get to tap out. And if the finish on your bow sight can’t stand up to a normal season, what does that tell you about everything else holding it together?
That’s why we chose Cerakote.
Not because it photographs well. Not because it checks a marketing box. Because it’s the hardest, most durable finish available. And if you’re a real bowhunter, that’s the only reason that matters.
What Is Cerakote and Why Should You Care?
Cerakote is a polymer-ceramic coating originally developed for firearms. The military uses it. Law enforcement uses it. Extreme industries that cannot afford failure use it.
Now bowhunters have it on their sights.
Here’s what Cerakote does that standard anodizing or paint simply can’t:
- Corrosion resistance — Rain, humidity, blood, sweat. Cerakote doesn’t corrode. It doesn’t rust. It doesn’t care.
- Impact and abrasion resistance — It’s harder than traditional coatings, which means scratches and chips that would strip bare metal on a lesser sight barely leave a mark.
- Temperature stability — From August velvet season to late-December rut pushes, Cerakote holds. Cold doesn’t crack it. Heat doesn’t peel it.
- Chemical resistance — Bug spray, scent eliminators, gun oil — the stuff you’re dousing your gear in all season long. Cerakote shrugs it off.
This isn’t a finish. It’s a field-tested coating that’s been proven in conditions far more demanding than an October morning in a treestand.
A Sight Built to Match Your Setup
We didn’t just slap Cerakote on our sights and call it a day. We went further.
Every Dialed Archery sight, from the STRIKE™ to the PRÜF™, comes with a color-matched Cerakote finish dialed to the exact specs of leading bow manufacturers. Mathews shooter? We’ve got you. Hoyt hunter? Same.
Dialed Archery Cerakote Color Matches
| Dialed Color | Matches |
|---|---|
| Dialed Sage | Mathews® Green Ambush |
| Dialed Clay | Mathews® Earth |
| Dialed Smoke | Mathews® Granite |
| Dialed Scree | Mathews® Shale |
| Dialed Bruin | Mathews® Kodiak Brown |
| Dialed Dusk | Hoyt® Tombstone |
| Dialed Whiskey | Hoyt® Bourbon |
| Dialed Drift | Hoyt® Sandstorm |
| Dialed Red Rust | Hoyt® Georgia Clay |
Your sight shouldn’t look like an afterthought bolted onto a bow you put serious money into. It should look like it belongs.
Built Right Here in the USA
This part matters to us.
Every Dialed Archery sight is designed, machined, and assembled in the USA. We’re not shipping molds overseas and hoping the tolerances hold. We’re running precision CNC-machined aluminum and putting it through the same finish process that industries far more demanding than archery rely on.
When you put a Dialed sight on your bow, you’re holding American craftsmanship, not a promise made on a product page and broken in the field.
No Gimmicks. Just Kills.
Here’s the thing about bowhunters: you’re not impressed by flash. You’ve seen too many products come and go. Too many “game changers” that game-changed their way right into your gear graveyard.
The Cerakote finish on Dialed sights isn’t a selling point. It’s a standard. It’s what we believe a serious hunting sight should come with — the same way it should come with tool-free micro windage, accessible axis adjustments, and a lifetime warranty that actually means something.
If it’s on your bow, it better earn it. Every. Single. Hunt.
The STRIKE™ — Simple, Hard, Deadly
The STRIKE™ is our non-mover sight built for hunters who don’t want complexity getting between them and the shot.
Minimal parts. Intuitive setup. Point-and-shoot performance that gets you from the bench to the field in just a few arrows. At 7.5 ounces, it’s light enough to keep your setup fast without sacrificing one ounce of toughness.
Cerakote finish. Mag Swap compatible. Backed by the Dialed Lifetime Warranty.
Built to be the last thing you think about on a hunt.
The PRÜF™ — When You Need More Range
The PRÜF™ is for the hunter who’s pushing distance. Our patented Angled Elevation System (A.E.S.) gives you more yardage before you run into arrow vane clearance issues. The VOID Dial is oversized and textured. It works with gloves on, in the dark, under pressure.
Precision-machined aluminum. Color-matched Cerakote finish. Dual SwitchTape™ rings. Tool-free micro windage. And all three axis adjustments accessible without frustration.
At 9.8 ounces, it’s one of the lightest premium mover sights on the market. And it’s backed by a lifetime warranty because we built it to last one.
The Bottom Line
Most bow sight manufacturers give you a product. We give you a commitment.
Cerakote isn’t just a coating, it’s proof that we thought about your hunt before you did. It’s a finish that shows up on Day 1 and still looks like it means business on Day 100.
We’re hunters, just like you. We’ve been in those situations where gear failed at the wrong moment, and we built Dialed Archery because we were tired of accepting it.
Your sight should give a damn. Because you do.
Designed, machined, and assembled in the USA. Backed by the Dialed Archery Lifetime Warranty. Shop the STRIKE™ and PRÜF™ at dialedarchery.com.
Frequently Asked Questions
What is Cerakote and why do Dialed Archery sights use it?
Cerakote is a polymer-ceramic coating known for its exceptional durability, corrosion resistance, and impact strength. Dialed Archery uses it because bowhunting demands a finish that can handle real-world conditions..
Does Cerakote match my bow’s finish?
Yes. Dialed Archery offers color-matched Cerakote options for Mathews and Hoyt bows so your sight integrates seamlessly with your setup.
Are Dialed Archery sights made in the USA?
Every Dialed Archery sight is designed, machined, and assembled in the USA.
What warranty do Dialed Archery sights come with?
All Dialed Archery sights are backed by the Dialed Archery Lifetime Warranty.
Which Dialed Archery sight is right for me?
The STRIKE™ is built for hunters who want simplicity and reliability in a fixed-pin setup. The PRÜF™ is for hunters who need extended yardage capability in a single-pin mover sight. Both feature Cerakote finishes and USA craftsmanship.
